Add 24-Hour Trouble Zones to a Vista-P panel

//Add 24-Hour Trouble Zones to a Vista-P panel

Add 24-Hour Trouble Zones to a Vista-P panel

How do I Add 24-Hour Trouble Zones to a Vista-P panel?

The Vista-15P, Vista-20P and Vista-21iP offer the option of a Configurable Zone type (2 on the Vista-15P, or 4 on the Vista-20P) which can be configured to provide a non-standard response in the event of such incidents as Loss of Heat, High Temp, Low Temp, Flood, or Refrigeration trouble. Configurable Zone Types allow you to choose the Contact ID reporting code for alarm and/or trouble, which is helpful when reporting to a Central Station.

The following settings will create a zone which activates a keypad trouble upon open or short (hardwired zones) or off-normal condition (wireless) whether the system is armed or disarmed, and will report the Contact ID Code specified if enabled (in this case, it would require a trouble report code in programming location *60). These examples assume this is the first Configurable Zone Type being programmed on the system, and will use Zone Type 90.

For a Hardwired Zone, enter programming and in *182, enter the following 10 digits:

8, 2, 8, 2, 8, 2, 0, 0, 0, 2

For a Wireless Zone, enter programming and in *182, enter the following 10 digits:

0, 2, 0, 2, 0, 2, 0, 0, 0, 2

In programming location *183, you must enter the Contact ID report code you wish to use with zones programmed as this type (Zone Type 90).

Loss of Heat – Program *183 as 1, 5, 3, 1, 5, 3

High Temp – Program *183 as 1, 5, 8, 1, 5, 8

Low Temp – Program * 183 as 1, 5, 9, 1, 5, 9

Flood/Water – Program *183 as 1, 5, 4, 1, 5, 4

Refrigeration – Program *183 as 1, 5, 2, 1, 5, 2

In zone programming, go to the appropriate zone number and program it as Zone Type 90.

Test

By | 2015-11-28T17:56:54+00:00 November 28th, 2015|Alarm System Info|Comments Off on Add 24-Hour Trouble Zones to a Vista-P panel

About the Author: